Introducing qb-1
Excellent airflow, dust-free and truly low profile
computer case
Dust filter
on
Features
LARGE DUST FILTER
Minimize dust with style
A detachable panel covers the whole front face of the case. it 's there to filter the air efficiently but, at the same time, to camouflage the contents of the case in style. As the sole point of entry, it guarantees that only filtered air is admitted to the interior of the cube.
The filter is made of 100% cotton cloth in a variety of colours (see shop). Cotton microfibres capture the dust while allowing plenty of air through.
The generous 3 cm distance between the filter and the fans, permits the fans to utilize the whole surface of the filter.
140mm ARCTIC FANS x 3
Perfect cooling for every workload
The case comes with 3 ARCTIC P14 PWM fans pre-installed.
The P14 fans are both quiet and powerful. Their pressure optimization helps to move air through the filter.
Effective against overheating: qb-1 was used in the production of all renderings of this website. With the CPU (Ryzen 5 3600) and 2 GPUs (Nvidia GTX 1060) working simultaneously under full load, their temperature never exceeded 65 °C.
Technical information for the P14 fans
Fan Speed:
Airflow:
Static Pressure:
Noise Level:
200 - 1700 rpm
72.8 CFM/ 123.76 m³/h
2,40 (mm/H2O)
0.3 Sone
For more information on ARCTIC P14 PWM fans click here.
RUBBER FAN MOUNTS
Minimized noise transmission
The fans are installed using rubber mounts instead of screws.
Even the quietest fans, produce vibrations which can be annoyingly audible if transmitted to the chassis of the case. Rubber mounts minimize vibration transmission which drastically decreases the noise caused.
ACCESSIBILITY
As easy to build as an open-air case
Forget about struggling to fit your hands into confined spaces to connect cables or tighten screws. Our case, when opened, gives you unrestricted access to all computer parts.
STORAGE SUPPORT
Choose between: 1 HDD + 1 SSD or 2 SSDs
Rubber spacers are provided for mounting the HDD in order to reduce any noise due to vibration.
PSU SUPPORT
The power supply rests on top of the center tube. This ensures that its weight is distributed uniformly without putting excess strain on its screws.
All PSUs with ATX PS/2 form factor are supported.
MOTHERBOARD SUPPORT
The form factors of the motherboard, Mini-ITX, MicroATX and ATX are supported.
Detachable motherboard standoffs are provided and can be placed where needed according to the motherboard's form factor.
MAGNETIC PCI BRACKETS
Thin magnetic strips are used to close PCI slots not in use.
It's super easy: remove the magnetic strips from the slots you want to use, they will stick anywhere on the case to be replaced easily when needed.
POWER BUTTON EXTENSION
The power button and the reset button are located at the back of the case, so they will not affect its minimalist appearance. Where the rear of the case is not freely accessible, the button can be accessed using the 2m extension cable which is included.
LIGHT INDICATOR
An LED light is installed on the right side of the case to let you know the computer is in operation.
The LED is powered by a SATA power adapter.
Weight
9 kg
Dimensions
(L) 390 x (W) 330 x (H) 330 mm
Materials
Steel (body), Wood (front panel), Cotton (filter)
Colours (case), (filter)
(black, grey, white),
(black, grey, white, green, red, blue, orange, yellow, brown,...)
Motherboard
ATX, MicroATX, Mini-ITX
Power supply unit
ATX PS/2
Storage
2 x 2.5” SSD or 1 x 2.5” SSD + 1 x 3.5” HDD, (a case with a drive bay, to support more drives, is in developement)
Clearance - CPU cooler
215 mm
GPU length
305 mm, (a larger version of the case, that will fit larger cards is in development)
Pre-installed fans - Front
2 x 140 mm (Arctic P14 PWM PST), 200 - 1700 rpm
Pre-installed fans - Rear
1 x 140 mm (Arctic P14 PWM PST), 200 - 1700 rpm
Dust filter
Front, (W) 303 x (H) 303 mm
LED power indicator
White dim LED
Specifications
Weight
Dimensions
Materials
Colours (case), (filter)
Motherboard
Power supply unit
CPU cooler clearance
GPU length
Storage
Pre-installed fans - Front
Pre-installed fans - Rear
Dust filter
LED power indicator
9 kg
(L) 388 x (W) 331 x (H) 331 mm
Steel (body), Wood (front panel), Cotton (filter)
(black, grey, white), (black, grey, white, green, red, blue, orange, yellow, brown,...)
ATX, MicroATX, Mini-ITX
ATX PS/2
215 mm
305 mm, (a larger version of the case, that will fit larger cards is in development)
2 x 2.5” SSD or 1 x 2.5” SSD + 1 x 3.5” HDD, (a case with a drive bay, to support more drives, is in developement)
2 x 140 mm (Arctic P14 PWM PST), 200 - 1700 rpm
1 x 140 mm (Arctic P14 PWM PST), 200 - 1700 rpm
Front, (W) 303 x (H) 303 mm
White dim LED